W 6L46F
Описание двигателя Wärtsilä 6L46F
Wärtsilä 6L46 - шестицилиндровый, рядный, четырехтактный, нереверсивный, с турбонаддувом и промежуточным охлаждением дизельный двигатель, с прямым впрыском топлива, со сдвоенным насосом.
Технические характеристики
|
Wärtsilä 6L46F IMO Tier 2 |
|
ME |
DE |
|
Cylinder output |
kW |
1200 |
1200 |
|
Engine speed |
rpm |
600 |
600 |
|
Engine output |
kW |
7200 |
7200 |
|
Mean effective pressure |
MPa |
2.49 |
2.49 |
|
Combustion air system (Note 1) | |||
|
Flow at 100% load |
kg/s |
12.4 |
12.4 |
|
Temperature at turbocharger intake, max. (TE 600) |
°C |
45 |
45 |
|
Temperature after air cooler, nom. (TE 601) |
°C |
50 |
50 |
|
Exhaust gas system (Note 2) | |||
|
Flow at 100% load |
kg/s |
12.8 |
12.8 |
|
Flow at 85% load |
kg/s |
11.4 |
11.7 |
|
Flow at 75% load |
kg/s |
10.5 |
11.3 |
|
Flow at 50% load |
kg/s |
6.9 |
7.6 |
|
Temp. after turbo, 100% load (TE 517) |
°C |
374 |
374 |
|
Temp. after turbo, 85% load (TE 517) |
°C |
320 |
317 |
|
Temp. after turbo, 75% load (TE 517) |
°C |
332 |
318 |
|
Temp. after turbo, 50% load (TE 517) |
°C |
352 |
351 |
|
Backpressure, max. |
kPa |
3 |
3 |
|
Calculated pipe diameter for 35 m/s |
mm |
921 |
921 |
|
Heat balance at 100% load (Note 3) | |||
|
Jacket water, HT-circuit |
kW |
811 |
811 |
|
Charge air, HT-circuit |
kW |
1517 |
1517 |
|
Charge air, LT-circuit |
kW |
719 |
719 |
|
Lubricating oil, LT-circuit |
kW |
722 |
722 |
|
Radiation |
kW |
207 |
207 |
|
Fuel system (Note 4) | |||
|
Pressure before injection pumps, nom. (PT 101) |
kPa |
800 ± 40 |
800 ± 40 |
|
Flow to engine, approx. |
m3/h |
5.6 |
5.6 |
|
HFO viscosity before engine |
cSt |
16...24 |
16...24 |
|
Max. HFO temperature before engine (TE 101) |
°C |
140 |
140 |
|
MDF viscosity, min. |
cSt |
2.0 |
2.0 |
|
Max. MDF temperature before engine (TE 101) |
°C |
45 |
45 |
|
Leak fuel quantity (HFO), clean fuel at 100% load |
kg/h |
4.5 |
4.5 |
|
Leak fuel quantity (MDF), clean fuel at 100% load |
kg/h |
22.5 |
22.5 |
|
Fuel consumption at 100% load |
g/kWh |
176 |
176 |
|
Fuel consumption at 85% load |
g/kWh |
171 |
171 |
|
Fuel consumption at 75% load |
g/kWh |
176 |
179 |
|
Fuel consumption at 50% load |
g/kWh |
177 |
183 |
|
Lubricating oil system | |||
|
Pressure before bearings, nom. (PT 201) |
kPa |
450 |
450 |
|
Pressure after pump, max. |
kPa |
800 |
800 |
|
Suction ability main pump, including pipe loss, max. |
kPa |
40 |
40 |
|
Priming pressure, nom. (PT 201) |
kPa |
80 |
80 |
|
Temperature before bearings, nom. (TE 201) |
°C |
56 |
56 |
|
Temperature after engine, approx. |
°C |
75 |
75 |
|
Pump capacity (main), engine driven |
m3/h |
175 |
155 |
|
Pump capacity (main), electrically driven |
m3/h |
150 |
150 |
|
Oil flow through engine |
m3/h |
130 |
130 |
|
Priming pump capacity |
m3/h |
35 |
35 |
|
Oil volume in separate system oil tank, min. |
m3 |
13.0 |
13.0 |
|
Oil consumption at 100% load, approx. |
g/kWh |
0.7 |
0.7 |
|
Crankcase ventilation flow rate at full load |
l/min |
1350 |
1350 |
|
Crankcase ventilation backpressure, max. |
kPa |
0.3 |
0.3 |
|
Oil volume in turning device |
l |
9.5 |
9.5 |
|
Oil volume in speed governor |
l |
1.7 |
1.7 |
|
High temperature cooling water system | |||
|
Pressure at engine, after pump, nom. (PT 401) |
kPa |
250 + static |
250 + static |
|
Pressure at engine, after pump, max. (PT 401) |
kPa |
530 |
530 |
|
Temperature before cylinders, approx. (TE 401) |
°C |
74 |
74 |
|
Temperature after charge air cooler, nom. |
°C |
91...95 |
91...95 |
|
Capacity of engine driven pump, nom. |
m3/h |
115 |
115 |
|
Pressure drop over engine, total |
kPa |
150 |
150 |
|
Pressure drop in external system, max. |
kPa |
100 |
100 |
|
Pressure from expansion tank |
kPa |
70...150 |
70...150 |
|
Water volume in engine |
m3 |
1.0 |
1.0 |
|
Low temperature cooling water system | |||
|
Pressure at engine, after pump, nom. (PT 451) |
kPa |
250 + static |
250 + static |
|
Pressure at engine, after pump, max. (PT 451) |
kPa |
530 |
530 |
|
Temperature before engine, max. (TE 451) |
°C |
38 |
38 |
|
Temperature before engine, min. (TE 451) |
°C |
25 |
25 |
|
Capacity of engine driven pump, nom. |
m3/h |
115 |
115 |
|
Pressure drop over charge air cooler |
kPa |
50 |
50 |
|
Pressure drop over built-on lube oil cooler |
kPa |
20 |
20 |
|
Pressure drop over built-on temp. control valve |
kPa |
30 |
30 |
|
Pressure drop in external system, max. |
kPa |
150 |
150 |
|
Pressure from expansion tank |
kPa |
70 ... 150 |
70 ... 150 |
|
Water volume in engine |
m3 |
0.3 |
0.3 |
|
Starting air system | |||
|
Pressure, nom. (PT 301) |
kPa |
3000 |
3000 |
|
Pressure at engine during start, min. (20°C) |
kPa |
1500 |
1500 |
|
Pressure, max. (PT 301) |
kPa |
3000 |
3000 |
|
Low pressure limit in air vessels |
kPa |
1800 |
1800 |
|
Consumption per start at 20°C (successful start) |
Nm3 |
6.0 |
6.0 |
|
Consumption per start at 20°C, (with slowturn) |
Nm3 |
7.0 |
7.0 |
Notes:
Note 1 At ISO 3046-1 conditions (ambient air temperature 25°C, LT-water 25°C) and 100% load. Tolerance 5%.
Note 2 At ISO 3046-1 conditions (ambient air temperature 25°C, LT-water 25°C) and 100% load. Flow tolerance 5% and temperature tolerance 15°C.
Note 3 At ISO3046-1 conditions (ambient air temperature 25°C, LT-water 25°C) and 100% load. Tolerance for cooling water heat 10%, tolerance for radiation heat 30%. Fouling factors and a margin to be taken into ac- count when dimensioning heat exchangers.
Note 4 According to ISO 3046/1, lower calorific value 42 700 kJ/kg, without engine driven pumps. Tolerance 5%. Load according to propeller law for mechanical propulsion engines (ME).
ME = Engine driving propeller, variable speed
DE = Engine driving generator
Subject to revision without notice.
Ко всему вышеуказанному оборудованию мы поставляем СЗЧ согласно каталожным номерам производителя.