OSC 50
Страницы каталога СЗЧПрименение: Сепаратор с самоочисткой для очистки или осветления всех видов топлива или смазочного масла, используемых для морских судов и дизельных электростанций.
Технические характеристики
Bowl | |
Sludge space (total) | 11 dm³ |
Speed - for densities of the product up to 1.05 kg/dm³ (at 15 °C) and - for densities of the separated solids up to 1.4 kg/dm³ |
6 440-6 550 rpm |
Check the speed for higher densities | with the factory. |
Starting time | 6-10 min |
Centripetal pump | |
Output (depending on medium and centripetal pump design) | 8 000 - 35 000 l/h |
Pressure head | 2-3 bar |
Standard operating water specification | |
Suspended matter | max. 10 mg/l |
Particle size | max. 50 μm |
Hardness: - up to 55 °C separating temperature | < 12° dH |
Hardness: - above 55 °C separating temperature | < 6° dH |
Note: In the case of hardness values < 6° (dH) corrosion due to soft, i.e. demineralized water cannot be ruled out. |
|
To convert the hardness values stated use the following formula: 1° dH = 1.79° fH = 1.25° eH = 17.9 ppm CaC03 |
|
Chlorine ions | < 100 mg/l |
pH | 6.5-7.5 |
Operating water | |
Quantity | min. 3 000 l/h |
Pressure | 2-5 bar |
Motor | |
Motor rating | 18.5-30 kW |
Speed at 50 Hz | 1 455 rpm |
Speed at 60 Hz | 1 745 rpm |
Design | IM B5 |
Enclosure | IP 55 |
Gear | 50/60 Hz |
Oil filling | approx. 7 I |
Feed pump | |
Attached gear pump or alternatively pump unit (gear or screw pump) | |
Output depending on the installation rating | 8 000 - 35 000 l/h |
Suction height | max. 0.4 bar |
Pressure head | 2 bar |
Weights | |
Separator (without motor, without pump) | 1 220 kg |
Bowl | 365 kg |
Three-phase AC motor | 140 kg |
Gear pump (depending on size) | 11 -46 kg |
Pre-Strainer (depending on pump capacity) | 8-26 kg |
Ко всему вышеуказанному оборудованию мы поставляем СЗЧ согласно каталожным номерам производителя.
Страницы каталога СЗЧ