Protection from automated form filling

Please type in the symbols shown in the image above*

Ultrasonic device - highly effective cleaning

The optimal, technically bester cleaning effect of Fil-Tec ultra-sonic equipment cannot be attained by conventional methods. Even stubborn soiling in drill¬holes and cavities is removed optimally by ultra-sonic treatment.

No other cleaning method achieves even remotely equivalent results when it comes to cleaning filter elements. A careful control of the cleaned filter elements for mechanical damage is still necessary. Apart from our ultra-sonic cleaning equipment for filter elements, Fil-Tec can also supply special solutions for e.g. cleaning cylinder heads, charging air coolers and other large machine parts.

The principle of the cleaning with Ultrasonic devices is based on cavitation. A generator excites frequencies above 20kHz. Piezoelectric oscillators transform these frequencies into mechanical energy. Thereby unstable pimples are formed which implode due to the movement in the cleaning fluid and thus cause pressure pulses. The thus provoked cavitation is the most effective and thoroughly cleaning method of all. The capabilities of the cleaning with Ultrasonic devices are nearly unbound.

The deep-cleansing is perfect for the cleaning of filter candles. Despite the forces of the cavitation this cleaning method is gentle to all material.

ultrasonic units

Name	Max tank volume, l	Max common capacity, kW	Outer dimensions, мм	Weight, kg
FT S700 HM	76	2,75	640х540х730	43
FT S1600 HM	165	3,05	740х730х730	62
FT S2000 HM	208	3,25	910х740х730	69
FT S3300 HM	383	8,05	1240х800х890	121

For filter elements and candle filters, Fil-Tec is able to offer a complete programme of products for high-pressure cleaning which can also be used for other cleaning tasks:

1. Patented cleaning nozzle FT2 with rotating jet;

2. Active cleaning agent with an extremely wide range of applications.

FT 31 is a cleaning fluid that can be used for practically all cleaning and degreasing purposes.

Features of FT31:

- is water based;

- has a boiling point above 100 °C;

- is irritating to eyes and skin;

- is not classified as a hazardous sub-stance according to transport regulations.

HP cleaning HP cleaning set FT31