• Equipment selection

    Installation works

    Start-up works

    Repair works

  • Safety and life-support systems

    Arctic model equipment

    Explosion-proof equipment

    Valve remote control

  • Ventilation and air conditioning systems

    Furniture and interior design

    Wall panels, carpeting

  • Trawling stations

    Ladders, ropes, anchors

    Refrigerator equipment

    Fish-searching equipment

    Fish-processing equipment

  • Drilling equipment

    Generator stations

    Position-control system

    Dwelling module installations

  • Logistics

    Customs and forwarding

    Consolidation and storage

    Supply control -Tracking system

  • Repair dock selection

    Design works

    Installation works

    Start-up works

    Repair works

    Ship survey



* Removes vegetable and fish oils, fats and mineral oils - petroleum products, whether or not hardened or carbonized.

* Suitable in sea or fresh water

* Based on Potassium silicates

* Biodegradable


StarMarine SPECIAL contains potassium silicates and surfactants. StarMarine SPECIAL is suited to remove vegetable and fish oils, mineral oils and fats, whether or not hardened or carbonized. StarMarine SPECIAL is undiluted not suited to use on zinc silicate coatings and most paints/ lacquers. Diluted with water to a solution of maximum 10% and at a temperature of maximum 65oC, the product is safe to use on epoxy-coatings. It is suited to use on most metals except for aluminum, tin, zinc and galvanized material.

Directions for use


Prior to cleaning with StarMarine SPECIAL, it is advised to wash with hot water of approximately 80°C. In case of drying and semi-drying oils, pre-washing is to be done with cold water.


Spraying after f.i. hydrocarbons

Depending on the amount and character of the contamination, StarMarine SPECIAL is to be used pure or diluted at a temperature of 65oC. Allow the product to work for 10 to 30 minutes and spray afterwards with a powerful high pressure. Warm water is preferred.


After a proper pre-wash, make a mixture of 1-2 % StarMarine SPECIAL with fresh water.

Re-circulate for 2-8 hours with a temperature of 65 ºC.

Flush the tank with warm seawater afterwards for 2-3 hours. Followed by fresh water to remove salts.


Colorless liquid, Odorless. Suitable for use on most metals, but is not to be used on tin or aluminum.

Flash point (PMCC)      : none

pH (1% Solution)          : >12.0


Print Send enquiry
Send enquiry

Send Response

Protection from automated form filling
Please type in the symbols shown in the image above*

Send response

Send an enquiry

Protection from automated form filling
Please type in the symbols shown in the image above*