• Equipment selection

    Installation works

    Start-up works

    Repair works

  • Safety and life-support systems

    Arctic model equipment

    Explosion-proof equipment

    Valve remote control





  • Ventilation and air conditioning systems

    Furniture and interior design

    Wall panels, carpeting

  • Trawling stations

    Ladders, ropes, anchors

    Refrigerator equipment

    Fish-searching equipment

    Fish-processing equipment

  • Drilling equipment

    Generator stations

    Position-control system

    Dwelling module installations





  • Logistics

    Customs and forwarding

    Consolidation and storage

    Supply control -Tracking system

  • Repair dock selection

    Design works

    Installation works

    Start-up works

    Repair works

    Ship survey

ULTRASONIC CLEANER (Unitor USC, Ultrasonic Mltcl.)

CLEANING LIQUID FOR USE IN ULTRASONIC CLEANING BATHS AND CLEANING MACHINES

• Suitable for use on all common metals (except zinc and some magnesium alloys)

• Designed for ultrasonic equipment

• Easy to dispose

• Low foaming so can be used in cleaning machines.

The cleaning of heavily contaminated fuel and lubricating oil filters, cylinder heads and air-coolers often give problems. The use of a cleaning agent only is generally unsatisfactory as only a part of the deposits will be removed, and in most cases carbon residues and other solid materials will be left behind. In such cases the use of ultrasonic sound waves in combination with a special cleaning agent gives good results. The contamination will be removed by the ultrasonic process in the liquid. The special detergents in the cleaning agent keep the contamination dispersed in the liquid and the complexing agents will partly dissolve them. Ultrasonic Cleaner has been developed for use in ultrasonic baths for the cleaning of all materials except zinc, galvanized parts and/or magnesium alloy.

Application

Ultrasonic Cleaner is used in ultrasonic cleaning baths and in cleaning machines.

Directions for Use

In Ultrasonic Cleaning Baths

The components to be cleaned can, if necessary, be degreased with Quick Break Cleaner and Electric Quick. Depending on the degree of contamination, Ultrasonic Cleaner should be used in a 5 - 25% solution in water at a temperature of 50 - 70° C. Dismantle the equipment to be cleaned (i.e. : remove top and bottom rings from filter candles), put the components in the bath taking care that the elements are completely immersed and kept separate. 

We recommend a cleaning time of 5 - 30 minutes but longer if necessary. Take the elements out of the bath and spray with a powerful water jet.

The cleaning solution has to be renewed and the bath cleaned regularly, because in a contaminated bath the parts cannot be cleaned effectively.

Cleaning Machines

Ultrasonic Cleaner is, depending on the nature and degree of contamination, applied in approx. 4% solution in cleaning machines. The contaminated objects must be placed in the machine and cleaned for 30-60 min. at a temperature of 80 - 90° C. Finally rinse with water.

Properties

Ultrasonic Cleaner is a low foaming mild alkaline liquid. It can be used on all common metals except zinc, galvanized materials and some magnesium alloys. We advise to test light metal alloys (aluminum/magnesium alloys etc.) i.e. pistons, turbo-blower parts etc. in advance for 5-10 minutes. Suitable for use on synthetic materials, rubber and cured lacquers.

Color                                 :               yellowish

Specific gravity (20°C)     :               1.19

Flash point PMCC            :               none

pH (1% solution)              :               approx. 11,5

IМО – Code                     :               8-1824-Т705

Special hazard and safety advice

In accordance with the latest directives of EEO Council the product has the following recommendations:

R 35: cause serious burns

S 2: keep away from children

S 26: after contact with eyes immediately rinse with water and address to a doctor

S 27: when get on clothes immediately it take off

S 37/39: use suitable clothes and eye/face protection

Contains approximately 8% of sodium hydroxide.

 

BACK TO ANALOGUES LIST

Print Send enquiry
Send enquiry
Закрыть

Send Response

Protection from automated form filling
 
Please type in the symbols shown in the image above*


Send response
Закрыть

Send an enquiry

Protection from automated form filling
 
Please type in the symbols shown in the image above*