ULTRASONIC CLEANER (Unitor USC, Ultrasonic Mltcl.)
CLEANING LIQUID FOR USE IN ULTRASONIC CLEANING BATHS AND CLEANING MACHINES
• Suitable for use on all common metals (except zinc and some magnesium alloys)
• Designed for ultrasonic equipment
• Easy to dispose
• Low foaming so can be used in cleaning machines.
The cleaning of heavily contaminated fuel and lubricating oil filters, cylinder heads and air-coolers often give problems. The use of a cleaning agent only is generally unsatisfactory as only a part of the deposits will be removed, and in most cases carbon residues and other solid materials will be left behind. In such cases the use of ultrasonic sound waves in combination with a special cleaning agent gives good results. The contamination will be removed by the ultrasonic process in the liquid. The special detergents in the cleaning agent keep the contamination dispersed in the liquid and the complexing agents will partly dissolve them. Ultrasonic Cleaner has been developed for use in ultrasonic baths for the cleaning of all materials except zinc, galvanized parts and/or magnesium alloy.
Ultrasonic Cleaner is used in ultrasonic cleaning baths and in cleaning machines.
Directions for Use
In Ultrasonic Cleaning Baths
The components to be cleaned can, if necessary, be degreased with Quick Break Cleaner and Electric Quick. Depending on the degree of contamination, Ultrasonic Cleaner should be used in a 5 - 25% solution in water at a temperature of 50 - 70° C. Dismantle the equipment to be cleaned (i.e. : remove top and bottom rings from filter candles), put the components in the bath taking care that the elements are completely immersed and kept separate.
We recommend a cleaning time of 5 - 30 minutes but longer if necessary. Take the elements out of the bath and spray with a powerful water jet.
The cleaning solution has to be renewed and the bath cleaned regularly, because in a contaminated bath the parts cannot be cleaned effectively.
Ultrasonic Cleaner is, depending on the nature and degree of contamination, applied in approx. 4% solution in cleaning machines. The contaminated objects must be placed in the machine and cleaned for 30-60 min. at a temperature of 80 - 90° C. Finally rinse with water.
Ultrasonic Cleaner is a low foaming mild alkaline liquid. It can be used on all common metals except zinc, galvanized materials and some magnesium alloys. We advise to test light metal alloys (aluminum/magnesium alloys etc.) i.e. pistons, turbo-blower parts etc. in advance for 5-10 minutes. Suitable for use on synthetic materials, rubber and cured lacquers.
Color : yellowish
Specific gravity (20°C) : 1.19
Flash point PMCC : none
pH (1% solution) : approx. 11,5
IМО – Code : 8-1824-Т705
Special hazard and safety advice
In accordance with the latest directives of EEO Council the product has the following recommendations:
R 35: cause serious burns
S 2: keep away from children
S 26: after contact with eyes immediately rinse with water and address to a doctor
S 27: when get on clothes immediately it take off
S 37/39: use suitable clothes and eye/face protection
Contains approximately 8% of sodium hydroxide.